Check Price
146 Customer Buy and Reviews
Technical Details
- This kerf saw saves 1/3 on wood loss for each cut
- Feeds easily when used for moderate rips and crosscuts on a table saw
- Reduces jump in for better pull control
- Eliminates bottom splintering on radial crosscuts
- The new 30-degree ATB tooth style stops the blade totally
From the Manufacturer
Forrest's blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up to 15 minutes per blade), superior C-4 carbide teeth are hand-brazed to the plate, and the blade is straightened and re-straightened multiple times throughout the process. Think of a Forrest blade as a tool in your shop, not an accessory. Forrest stands behind its' blades by offering a sharpening service that bring blades back to the exact tolerances offered in a new blade. And this same exacting service is available for other manufacturer's blades as well, so they should come back better than new. Forrest Woodworker 1 Saw Blade For Radial and Table Saws. These trim and cross-cut ALL PURPOSE blades give scratch-free POLISHED cuts on wood, RIP or CROSSCUT, up to 2-inches thick. They have a 30-degree Alternate Top Bevel with a 5-degree Face Hook on 10-inch diameters and smaller.
Product Description
With this all purpose blade for table saws you can rip and crosscut 1" 2" rockhards and softwoods resulting in a smooth as sanded surface. With 20° face hook, ply veneers will crosscut with no bottom splinter at moderate feed rates. Double hard and 40% stronger C4 carbide will give up to 300% longer life between sharpenings. Ends blade changing (one blade does rip, combo and crosscut), second-step finishing and cutting 1/16" oversize to allow for resurfacing. Buy and sharpen one blade instead of 3 (24T rip, 50T combination and 80T crosscut).
Forrest's blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up to 15 minutes per blade), superior C-4 carbide teeth are hand-brazed to the plate, and the blade is straightened and re-straightened multiple times throughout the process. Think of a Forrest blade as a tool in your shop, not an accessory. Forrest stands behind its' blades by offering a sharpening service that bring blades back to the exact tolerances offered in a new blade. And this same exacting service is available for other manufacturer's blades as well, so they should come back better than new. Forrest Woodworker 1 Saw Blade For Radial and Table Saws. These trim and cross-cut ALL PURPOSE blades give scratch-free POLISHED cuts on wood, RIP or CROSSCUT, up to 2-inches thick. They have a 30-degree Alternate Top Bevel with a 5-degree Face Hook on 10-inch diameters and smaller.
Product Description
With this all purpose blade for table saws you can rip and crosscut 1" 2" rockhards and softwoods resulting in a smooth as sanded surface. With 20° face hook, ply veneers will crosscut with no bottom splinter at moderate feed rates. Double hard and 40% stronger C4 carbide will give up to 300% longer life between sharpenings. Ends blade changing (one blade does rip, combo and crosscut), second-step finishing and cutting 1/16" oversize to allow for resurfacing. Buy and sharpen one blade instead of 3 (24T rip, 50T combination and 80T crosscut).
